Supercritical Fluid Lab scale Dyeing Equipment
Supercritical Fluid Lab scale Dyeing Equipment Lab Type Supercritical Fluid CO2 Dyeing Equipment Dyeing Equipment Selangor, Malaysia, Kuala Lumpur (KL), Puchong Supplier, Distributor, Supply, Supplies | Renetech Sdn Bhd
  1.Pressure=Max.  300 Bar/ 4350 PSI 
  2.Temperature=Max. 130 ”ę 
2-1.CO2 Dye Vessel= 1L  X1set 
    1.Pressure=Max. 300 Bar (4350 Psi)
    2.Temperature=Max. 130 ”ę
    4.Material=Stainless steel.
    5.Heating system: electric heating
2-2.CO2 Dye Vessel Control system 
    1.Dye Vessel Temperature controller X 1set
    2.CO2 Temperature controller X 1set
    3.CO2 flow direction controller X 1set
2-3.Pressure control system= PM-10000C X 1set 
2-4.Cooling system= 1 set 
3.Material of tanks, piping and valves.  
  1.Piping:SUS 304
  2.Structure: Aluminum
4.Control  system and monitor  
  1.Control valve=manual type/ high pressure valve
  2.Tenmperature control= Temperature cintrolor with thermal couple”£
  3.Pressure control=Pressure gauge/Pressure Transducer”£
5.Safety and Protection  
  1.Rupture dick= set pressure  5000 Psig
  2.Heating area with isolation jacket
6.Utility requirement (Supplied by buyer)  
  1.Power require= 220 V, 30 A
  2.Compressed air: 7Kgf/cm2
  3.CO2 suppy=Liquid CO2 cyclinder with inner tub
7.Option( not standard )  
  1.Spare parts=(ex: seal/rupture dick,…….)
  2.Co-Solvent pump module

Please leave your enquiry here, we will reply as soon as possible.

*only support gif, jpeg, jpg, png, pdf
Switch To Desktop Version