Fume Hood (Dry Scrubber Built-in) (LDF-N180S)
Dry exhaust gas treatment system installed. It helps to remove organic solvents which difficult to remove, acids, alkali etc.
Features of Fume Hood (Dry Scrubber Built-in) (LDF-N180S)
- Adsorption device installed on top of fume hood.
- Activated carbon and chemical adsorbent (4 type) are selectable.
- Time meter that shows the time of adsorbent is equipped.
Specifications
| Item Code | A002993 |
|---|---|
| Model | LDF-N180S |
| Exterior | Cold-rolled steel plate (chemical resistance coating) |
| Interior | Non-asbestos and non-combustible decorative board |
| Working surface (selection) | Ceramic tight (S) |
| Glass door | Tempered glass 6mm balance weight |
| Water faucet | Single type 1pc |
| Socket | AC115V/220V × 1pc |
| Fluorescent lamp | 40W 1pc |
| Case material | PVC |
| Adsorption | Adsorbent amount (K type) 30 kg |
| Timer | 0 ¡« 9,999.9h (for adsorbent specification time) |
| Differential pressure | For pre-filter ( 0 ¡« 490Pa / 0 ¡« 50mmH2O) 1pc |
| Safety mechanism | Exhaust delay timer, Door falling prevention stopper, Flow monitor |
| Option | Gas tap, LED, safety mechanism |
| Exhaust air volume | 19m3/min |
| Internal static pressure | 275Pa (28mmH2O) |
| External dimensions£¨W×D×H mm£© | 1800×750×2600mm |
| Power Source | 115/220V |
| Weight | 430kg |
Maintenance and warranty
- Conditions: temperature and humidity: 23 deg.C+/-5 deg.C, 65%RH+/-20% (no load)
- External dimensions do not include protrusions.
