Fume Hood (Dry Scrubber Built-in) (LDF-N120L)
Dry exhaust gas treatment system installed. It helps to remove organic solvents which difficult to remove, acids, alkali etc.
Features of Fume Hood (Dry Scrubber Built-in) (LDF-N120L)
- Adsorption device installed on top of fume hood.
- Activated carbon and chemical adsorbent (4 type) are selectable.
- Time meter that shows the time of adsorbent is equipped.
Specifications
Item Code | A002994 |
---|---|
Model | LDF-N120L |
Exterior | Cold-rolled steel plate (chemical resistance coating) |
Interior | Non-asbestos and non-combustible decorative board |
Working surface (selection) | Stainless (L) |
Glass door | Tempered glass 6mm balance weight |
Water faucet | Single type 1pc |
Socket | AC115V/220V × 1pc |
Fluorescent lamp | 32W 1pc |
Case material | PVC |
Adsorption | Adsorbent amount (K type) 20 kg |
Timer | 0 ¡« 9,999.9h (for adsorbent specification time) |
Differential pressure | For pre-filter ( 0 ¡« 490Pa / 0 ¡« 50mmH2O) 1pc |
Safety mechanism | Exhaust delay timer, Door falling prevention stopper, Flow monitor |
Option | Gas tap, LED, safety mechanism |
Exhaust air volume | 12m3/min |
Internal static pressure | 216Pa (22mmH2O) |
External dimensions£¨W×D×H mm£© | 1200×750×2600mm |
Power Source | AC115/220V |
Weight | 330kg |
Maintenance and warranty
- Conditions: temperature and humidity: 23 deg.C+/-5 deg.C, 65%RH+/-20% (no load)
- External dimensions do not include protrusions.