Laboratory Washer (Process Monitorable) (AWD510DRY)
Color lighting to make it easy to determine the stage of the washing process.
Features of Laboratory Washer (Process Monitorable) (AWD510DRY)
- Large double glass window affording a good viewof the inside.
- Powerful alkaline is set as standard liquid detergent.
- Effluent temperature controlled to stay at 60°C or below.
- Feed-water connection established between the rack and main body simply by closing the door.
Specifications
Item Code | 291070 |
---|---|
Model | AWD510DRY |
Washing system | Upper / Middle / Lower-stage rotating jet nozzles |
Washing process | Pre-washing, Washing, Rinsing, Rinsing with pure water (optional), Pre-drying (optional) |
Water temp. | Set Off to Max. 80¡æ (pre-washing / washing), Max. 93¡æ (rinsing) |
Hot-water supply | 2kW Pipe heater |
Detergent supply | Automatic weighing and loading (liquid detergent) |
Drain method | Hot water cooling and forced draining with pump |
Water supply Tap water (Necessary) | Temp. 5 to 25¡æ , Raw water feed pressure 0.1 ¡« 0.5MPa, G3/4 (main unit), G1/2 (primary) |
Water supply Hot water (Discretionally) | Temp. 5 to 60¡æ , Raw water feed pressure 0.1 ¡« 0.5MPa, G3/4 (main unit), G1/2 (primary) |
Detergent | Dedicated detergent (optional) |
Pure water connection (Discretionally ) | Raw water feed pressure 0.02 ¡« 0.1MPa, Hose nipple I.D. 10.5mm |
Exterior | Stainless steel plate £¨SUS304£© |
Interior | Stainless steel plate £¨SUS304£© |
Leg | Level adjuster |
Display | Over current/Electric leakage breaker, Overheat prevention, Door lock, Water leakage |
Safety Device | HEPAÎÂïLǬÔ¼s60¡æ¹Ì¶¨£© |
Drying method (optional) | Hot-air drying (HEPA filter, fixed at approx. 60¡æ ) |
Over current/Electric leakage breaker, Overheat prevention, Door lock, Water leakage | Raw water supply hose (for tap water and hot water), Drain hose, Lid for removing upper-stage rack, Stainless steel rack for detergent, Drain hose clamp, Overflow water hose, Detergent tube |
Internal dimensions£¨W×D×H mm£© | 500×480×490mm |
External dimensions£¨W×D×H mm£© | 580×600×840mm |
Power Source |
AC220V 13A Single-phase with step-down transformer |
Weight | 87kg |
Maintenance and warranty
Conditions: temperature and humidity: 23 deg.C+/-5 deg.C, 65%RH+/-20% (no load)
External dimensions do not include protrusions.