Laboratory Washer (Fully-automatic, Large Capacity) (AW83Z)
Laboratory Washer (Fully-automatic, Large Capacity) (AW83Z) AW Series Laboratory Washer Washer Selangor, Malaysia, Kuala Lumpur (KL), Puchong Supplier, Distributor, Supply, Supplies | Renetech Sdn Bhd Test tube rack Jet nozzle Flash rack Breaker rack
Ideal for washing large equipment and a large amount of instruments
 
Features of Laboratory Washer (Fully-automatic, Large Capacity) (AW83Z)
  • Two washing chambers
  • Selectable three washing patterns
  • Jet rack (option) can remove the dirt of containers more easily
  • Fixing type rack and spinning type jet nozzle can avoid the brakeage of containers
  • Available hot water washing by built-in heater
  • Liquid detergent is automatically supplied from detergent container (powder detergent also available by adding powder in each time)
Specifications
Item Code 291016
Model AW83Z
Washing water temp. Supplied temp. to 80¡æ
Accessories Supply hose I.D.18mm, 2m×1pc, Drain hose (with coupler) 2m×1pc, Detergent (Amorphous phosphorus) 1kg, Measuring spoon (for 50ml) 1pc, Test tube rack support 1pc, Hose clamp 1pc
Washing compartment Two washing chambers
Washing compartment Pressure water jet from two directions; Top and bottom, Jet nozzle spinning
Washing compartment Fixed rack (Changeable to batch type jet rack)
Washing pattern Selectable three washing patterns *Final rinse is option
Washing pattern 1. Pre-washing → Washing → Rinse → Final rinse*
Washing pattern 1. Pre-washing → Washing → Rinse → Final rinse*
Washing pattern 3. Rinse → Final rinse*
Washing time Pre-washing, Washing, Rinse: settable 1 to 99min
Washing time Rinse: settable up to 5 times by batch system
Washing time Final rinse (to connect with pure water supplying system): Rinse by pure water 50L, settable up to 5 times, start to wash after reaching to the set water level, Timer count starts after reaching to the setting temp.
Supplying water temp. Room temp. to 80¡æ
Washing water temp. Same water temp. for pre-washing and washing, no water heat-up for rinse and final rinse
Liquid detergent supplying type Automatic supply by pump (Adjustable supply amount)
Liquid detergent tank capacity 2L
Required water amount Approx. 28L for each pre-wash, wash and rinse
Hot water supply system Heater (Built-in: 6kW) heat-up or connection to primary hot water supply
Container stand Shelf board 2pcs. (Standard)
Water supplying system Electromagnetic valve Open/Close, water flow amount is fixed by flow switch
Water drain system Forced drain by pump
Exterior Cold rolled steel plate with melamine resin baking finish
Interior Stainless steel
Pump Washing pump: 355W/560W Drain Pump: 45W
Shelf board 550×550mm, max. load 245N (25kg)
Internal dimensions£¨W×D×H mm£© 600×630×1080mm
External dimensions£¨W×D×H mm£© 860×770×1795mm
Power Source AC220V 28A
Three phase with step down transformer
Weight 220kg
 
Maintenance and warranty
Conditions: temperature and humidity: 23 deg.C+/-5 deg.C, 65%RH+/-20% (no load)
External dimensions do not include protrusions.

Please leave your enquiry here, we will reply as soon as possible.


*only support gif, jpeg, jpg, png, pdf
Switch To Desktop Version