Spray Dryer Pulvis Mini Bed (GB210-B)
Spray Dryer Pulvis Mini Bed (GB210-B) GB Series Spray Dryer Granulating & Spray Drying Selangor, Malaysia, Kuala Lumpur (KL), Puchong Supplier, Distributor, Supply, Supplies | Renetech Sdn Bhd
Spray dryer capable of granulating and drying wet powder.
 
Features of Spray Dryer Pulvis Mini Bed (GB210-B)
  • Designed to granulate powder and dry wet powder using a fluid bed. This is a fluid bed drying granulator used in combination with the basic unit GB210 and Mini-bed attachment GF200.
  • The chamber is made of ultra hard glass and the user can observe status of the fluid bed or spraying status. Also, the flowage meter, the spraying pressure
  • meter, the chamber inlet/outlet temperature indicator are useful for evaluation of data
  • The unit can also be used as a spraying dryer by installing the mini spray attachment GF300 (optional)
  • The unit has an automatic lift as a standard to enable convenient installation or removal of the glass chamber attachment
Control Panel
Inlet temperature, outlet temperature, and drying air amount are digitally displayed. Setting is made on the touch panel that allows operation settings, operation status display as well as error display, and settings of various operation conditions.

Specifications
Item Code 212778
Model GB210-B
Temp. adjusting unit setting range 40 to 220°C (inlet temperature), 0 to 98°C (Outlet temperature)
Temperature adjusting accuracy Inlet temperature ± 1°C
Spraying system Two-way nozzle, Nozzle No. 1A as standard
Drying air amount adjusting range 0 to 0.7m3/min
Spray air pressure adjusting range 0 to 0.3MPa
Liquid sending pump flow rate range 0 to 26mL/min
Spray air pressure adjusting range 0 to 0.3MPa
Liquid sending pump flow rate range 0 to 26 mL/min
External output Inlet temperature, Outlet temperature, Temperature outlet (4-20 mA)
Automatic lift Moving up/down of glass chamber automatic lift
Temperature adjusting device PID digital temperature adjusting device
Touch panel Blower, Heater, Liquid sending pump, Pulse jet switch, Error display
Control select switch Inlet temperature, Output temperature control switch (Outlet temp. control is conditional)
Temperature sensor K-thermocouple
Heater 2.0kW (at200V) to 2.88kW (at240V)
Liquid sending pump Fixed amount peristaltic pump
Spraying air pump Spraying air compressor (Sold separately) is used
Service outlet For stirrer: AC100V, Max. 2A
Suction blower Bypass blower, Brushless DC motor
Filter Suction filter, Exhaust filter
Recovery of solvent Solvent recovery unit GAS410 (Sold separately) is used
Spray nozzle cooling mechanism Connector: nipple×2, O.D.: ø10.5mm
Spray air connection diameter Nipple diameter: ø7mm
Exhaust connecting diameter ø50mm
Exhaust connecting diameter ø50mm
Safety device Inlet/Outlet temperature overheat, Sample feed reverse rotation mechanism, Over current electric leakage breaker, Nozzle connection error
Accessories Silicon tube (with a stopper)×3, Tiron tube (with a stopper)×2, Exhaust duct (with one hose band)×1, Outlet temperature sensor, Spray air tube, Sample box, Static electricity removal earth, Teflon braided hose 5m (with two hose bands), Container table
External dimensions£¨W×D×H mm£© 760×420×1350mm
Power Source AC220V 17A
Single phase
Weight 110kg
 
Maintenance and warranty
Conditions: temperature and humidity: 23 deg.C+/-5 deg.C, 65%RH+/-20% (no load)
External dimensions do not include protrusions.

Please leave your enquiry here, we will reply as soon as possible.


*only support gif, jpeg, jpg, png, pdf
Switch To Desktop Version