Laboratory Flask Mixer (LM200)
LM Series compact design flask mixer features integrated drive and stirring seal allowing direct installation of flask and stirring in a vacuum and sealed state. No time-consuming shaft alignment required. Its strong stirring power is perfect for samples of high volume and high viscosity.
Features of Laboratory Flask Mixer (LM200)
- LM100/110 is designed with manual type rotation speed while LM200/210 is equipped with digital indicator.
- Wide range rotation speed of 50-1000 rpm
- Capable of vacuuming up to 399.9Pa without impairing rotation efficiency
- Directly attachable to a three-neck flask 24/40, 29/42 optional
- Maintenance free and superior DC brushless motor
- Belt drive transmission minimizes noise and vibration
- Variety of stirring shafts and blades available to handle small to large volume samples
- Fluorine rubber seal as standard for shaft seal, superior chemical resistant Teflon® rubber seal available as option
- At the flask joint, FKM o-ring is used as standard, superior chemical resistant Kalrez® o-ring available as option
- Equipped with 24/40 rotary joint, 29/42 optional
- Capable of AC100-240 by changing power cord
Specifications
Item Code | 231528 |
---|---|
Model | LM200 |
Operating temp. range | 5¡æ¡«35¡æ |
Operating speed range *1 | 50¡«1000rpm*1 |
Max. torque | range 0.1N・£í |
Max. ultimate vacuum | 399.9 Pa below |
Exterior | PBT /ADC12 (Surface treatment: Baking finish) |
Motor | DC brushless motor 30W |
Power switch | Speed control dial with switch (Stepless adjustment) |
Rotation speed indication | 3 digits ×10 rpm (Digital display) |
Operation indicator lamp | None (Confirm operation with speed indicator) |
Adaptable flask size | 50~5000ml |
Joint size | TS24/40 |
Chuck | ø8mm (ø7.9~7.95) |
Sealing material | PTFE (rotary joint) / FKM (oil seal,o ring) |
Safety device | Overload protection function*2, Coupling cover (Hair entanglement prevention structure), Slow start function |
Included accessories | Hexagon socket head cap screw & wrench, AC adapter, 3m power cord, Coupling cover, Handle (arbor), Fask clip |
Operational accessories*3 | Stirring shaft (PTFE, Stainless steel, Glass), Propellers (Different types and sizes), Stand |
External dimensions£¨W×D×H mm£© | 59×108×222mm |
Power Source | AC100/120V |
Weight | 0.7kg |
Remarks(specifications)
1 Max. revolutions differ depending on the combination of oil seal + stirring shaft 50~1000rpm: FKM oil seal + PTFE stirring shaft / PTFE oil seal + glass or SUS stirring shaft : 50~300rpm: FKM oil seal + glass or SUS stirring shaft / PTFE oil seal + PTFE
Maintenance and warranty
Conditions: temperature and humidity: 23 deg.C+/-5 deg.C, 65%RH+/-20% (no load)
External dimensions do not include protrusions.