Cooling Water Circulator (Externally Closed Circulation, Inverter Control) (CFI1011)
Cooling Water Circulator (Externally Closed Circulation, Inverter Control) (CFI1011) CFI Series Cooling Water Circulator (Inverter Control) Water Circulator Selangor, Malaysia, Kuala Lumpur (KL), Puchong Supplier, Distributor, Supply, Supplies | Renetech Sdn Bhd Option installation example
Cooling water circulation system of high output, saving energy consumption by inverter control.
 
Features of Cooling Water Circulator (Externally Closed Circulation, Inverter Control) (CFI1011)
  • High-lift type (Model: CFI 701/911/1111) is suitable for cooling the Analyzing equipment (ICP, ICP-MAS, X-ray analyzer device, Electron microscope etc.) with high power pump equipped.
  • Various optional accessories are available.
Specifications
Item Code 221589
Model CFI1011
Type General type
Circulation type Closed System Circulation / Tap Water or Anti-freezing liquid
Operating temp. range -10 to 30¡æ
Temp. fluctuation (JIS) ±0.1°C
Cooling capacity (at Liquid Temp. 20°C) Approx. 2,900W
External circulation flow rate (50/60Hz) Approx. 15 / 17L/min
Pump max. lift (50/60Hz) Approx. 10 / 14m
Tank Polyethylene
Temp. control Refrigerator inverter control
Temp. sensor Pt100Ω, T thermocouple
Temp. setting / display Digital setting/display
Refrigerator / coolant Air-cooling inverter type / R410A
Heat exchanger Plate type heat exchanger, SUS316
External circulation Nozzle Nozzle is option, Rc1/2
Circulation pump Magnet Pump 65W
Safety countermeasures Over current electrical leakage breaker, Temp. sensor error, Float switch, Refrigerator over load relay, Refrigerator high pressure relay,
Safety countermeasures Ambient temp. upper limit error, Refrigerator overload reducing operation, Pump thermal protector, Delay timer for protecting refrigerator, Inverter error
Other function Water bath filter, Drain cock, Air intake filter, Calibration off-set, Auto start, Auto stop, Display the amount of Power consumption, Integration time
Accessories Lid, Drain hose ( I.D. 9mm x 500mm), Drain hose nozzle (O.D. 10mm)
External dimensions£¨W×D×H mm£© 380×520×690mm
Remarks(dimensions) Water bath capacity approx. 5L
Power Source AC220V 3A
Single-phase with step down transformer
Weight 44kg
 
Maintenance and warranty
Conditions: temperature and humidity: 23 deg.C+/-5 deg.C, 65%RH+/-20% (no load)
External dimensions do not include protrusions.

Please leave your enquiry here, we will reply as soon as possible.


*only support gif, jpeg, jpg, png, pdf
Switch To Desktop Version