Shaking Water Bath Incubator (BT200)
The BT units are constant temperature water baths that shake. They feature an easy-to-use and flexible inner tank and integrated vibrating design. They also incorporate a thermostat that enables fixed operation and comprehensive safety features.
Features of Shaking Water Bath Incubator (BT200)
Features
The vibration range varies extends from 10 to 44mm and can be freely changed, while the oscillation frequency ranges from 20 to 160 times per minute, allowing for non-incremental speed transition. settings are input using a controller with a digital display.
Features
Settings for the temperature and timer can be easily input using the up and down keys, and the settings appear on a digital display.
Specifications
Specifications
Item Code | 221133 |
---|---|
Model | BT200 |
Method | Reciprocating shaking system, Stirring by pump |
Operating temp. range | Room temp. +5°C to 80°C£¨when top cover is installed£© |
Temperature control accuracy | ±0.02°C to 0.08°C |
Temperature distribution accuracy | ±0.1°C |
Temperature rising time | Approx. 70 min. |
Shaking frequency | 20 to 160 times/min |
Shaking width | 10 to 40mm (adjustable) |
Material (Interior) | Stainless steel |
Temp. Controller | PID control by microprocessor |
Temp. Sensor | Pt resistance thermometer (double sensor) |
Temp setting/display method | Digital setting |
Overheat protector | ON/OFF control by microprocessor |
Overheat protect setting method | Digital setting |
Heater | Copper pipe heater (nickel plated) 1.9kW |
Stirring System | Magnet pump 10W |
Shaker | Gear motor 40W |
Shaking speed setting system | Analog setting |
Timer | 1 min. to 999 hr. 50 min. Digital display, Quick automatic start/stop |
Safety countermeasures | Self-diagnosis function(Heater defective, Sensor defective, Set value abnormal, SSR short circuit and Overheat protector) Warning buzzer and alarm lump, |
Container flame number, Test tube | Dia : 16.5mm, Length : 150 to 200mm(JIS)¡¡169 pcs. |
Flask | Round, Erlenmeyer flask 100/300/500ml, 16/9/6pcs. |
Shaking Rack (Dimensions W×D×Hmm) | 1 pc. 290×290×170 |
Spring Pitch | 20mm (both length and width) |
Internal dimensions£¨W×D×H mm£© | 372×350×250mm |
External dimensions£¨W×D×H mm£© | 649×414×325mm |
Remarks(dimensions) | Internal capacity ¡¡23L£¨When the water is full£© |
Power Source |
AC115V /AC220V Single phase with step-down transformer |
Weight | 40kg |
Maintenance and warranty
Conditions: temperature and humidity: 23 deg.C+/-5 deg.C, 65%RH+/-20% (no load)
External dimensions do not include protrusions.