Dry Sterilizer (Laboratory use) (SK401)
Dry heat sterilization with independent overheat prevention device
Features of Dry Sterilizer (Laboratory use) (SK401)
- Programmable
- High precision controller with improved display visibility and operability
- Standard equipped with calibration offset, lock function, power recovery mode, power on and operation time accumulation, calendar time, accumulation power
- consumption monitoring, total CO2 emission, and heat output, save and access operator setting information
- Maximum 99 steps, 99 patterns, repeat operation
-
Easy sample data collection with cable port
Safety features
Standard equipped with self diagnostic functions, independent overheat prevention device and earth leakage breaker
Specifications
Specifications
Item Code | 212909 |
---|---|
Model | SK401 |
Circulation method | Natural convection |
Temp. setting range | Room temp. +5~260°C |
Temp. control accuracy | ±1¡æ£¨at 260¡æ£©JTM K05/±1.5¡æ£¨at 260¡æ£©JIS |
Temp. fluctuation | ±5¡æ£¨at 260¡æ£©JTM K05/20¡æ£¨at 260¡æ£©JIS |
Temp. rising time | Approx. 60min. |
Interior / Exterior material | Stainless Steel / Chrome free electrogalvanized carbon steel sheet coated with chemical-proof baked-on finish |
Insulation Material | Glass wool |
Heater | SUS 1.2kW |
Sensor | K type Thermocouple |
Fan type / Fan motor | ¨D |
Cable port | I.D. 33mm (right side) |
Exhaust port | I.D. 33mm×2 (on top) |
Temperature control | PID control by microprocessor |
Temperature display | Temp. display: Green 4-digit LED digital display (increment: 1°C) |
Timer | 0 min~99 hrs 59 min (increment: 1 min. or 1 hr.) |
Heater control | Triac with Zero-cross control |
Operation function | Fixed temperature, Auto start, Auto stop, Quick auto stop, Program (99 steps, 99 patterns, Repeat operation function) |
Additional function | Power on and operation time accumulation function (up to 65535 hours), Calendar time (24 hours), Calibration offset, |
Safety device | Self-diagnostic functions (Sensor failure, SSR short circuit, Heater failure, Main relay contact failure, Automatic overheat prevention), |
Internal dimensions£¨W×D×H mm£© | 450×490×450mm |
External dimensions£¨W×D×H mm£© | 560×600×820mm |
Remarks(dimensions) | Internal capacity¡¡99L |
Power Source |
AC100V 12.5A Breaker capacity¡¡15A |
Weight | 50kg |
Maintenance and warranty
Conditions: temperature and humidity: 23 deg.C+/-5 deg.C, 65%RH+/-20% (no load)
External dimensions do not include protrusions.