Low Temperature Incubator (Programmable) (IN804)
Low Temperature Incubator (Programmable) (IN804) IN Series Low Temperature Incubator Incubator Selangor, Malaysia, Kuala Lumpur (KL), Puchong Supplier, Distributor, Supply, Supplies | Renetech Sdn Bhd Temperature Drop Curve interior Air current
Best selling incubator for low temperature tests and environmental tests
 
Features of Low Temperature Incubator (Programmable) (IN804)
  • Standard low temperature incubator
  • Available for wide variety of applications from various constant temperature tests to environmental tests
  • Forced circulation with a fan enables high accuracy temperature control and even temperature distribution
  • Employment of a large dual-glass door which, with the inner door, forms a triplex glass to improve temperature heat retention(IN604W)
  • A convenient slide shaker table (optional) is available to make taking out/putting in samples easier (IN604W)
  • Room light to make inside the unit easily visible as standard(10W fluorescent lamp, IN604W)
  • The glass inner door keeps temperature changes during observation samples minimum
  • Employs coolant R404A that complies with Freon regulations
Specifications
Item Code 211280
Model IN804
System Forced air convection
Operating Temperature Range -10¡«50¡æ
Temperature Adjustment Accuracy ±0.3¡æ£¨when refrigerator in continuous operation), ±1.0¡æ£¨when refrigerator cycle operation£©
Temperature Distribution Accuracy ±1.0¡æ£¨at 37¡æ£©
Max. Temperature Reaching Time 20¡«50¡æ¡¡approx. 30min.
Lowest Temperature Reaching Time 20¡«-10¡æ¡¡approx. 65min.
Interior Stainless Steel
Exterior Chrome-free electronic galvanized plated steel plate chemical-proof baking finish
Heat Insulation Material Stylene foam (non-freon)
Refrigerator Air-cooled fully closed compressor 300W
Refrigerator Medium R404a
Defrosting Mechanism Manual ON / Auto OFF, Timer operation, Cycle operation
Blower Axial fan
Heater Iron-chrome wire heater 750W
Sensor Double sensor:Pt. resistance temperature detector, Pt100Ω(Temperature controller), K-thermocouple(Overheat prevention device)
Cable Port 32mm ID £¨Right side from the front)
Temperature Control PID
Temperature Setting Digital setting with¡ø¨‹ key
Temperature Display Measured temperature: 4-digit orange LED digital display+ VFD fluorescent display
Timer/Timer Resolution 0¡«999 hrs. 59min. / 1min.
Operation Function Fixed operation, Program operation, Auto stop, Auto start
Additional Function Timer function£¨accumulated time to 49,999 hrs.£©, Calibration off-set function, Clock display
Safety Device Self-diagnostic functions(Temperature sensor error, Heater disconnection, SSR short-circuit, Main relay error, Automatic overheat prevention), Key-lock, Over current ELB, Overheat preventive device
Shelf Loading Capacity 15kg/shelf
Shelf support step number 23 steps
Shelf support pitch 30mm
Shelf / Support Stainless punching metal 5 shelves / 10 supports
Room Light / Service Outlet -
Program Mode Up to 32 steps, Repeat, Gradient operation
Door Key -
Internal dimensions£¨W×D×H mm£© 600×477×1000mm
External dimensions£¨W×D×H mm£© 710×645×1630mm
Remarks(dimensions) 286L
Power Source AC220V 6A
Weight 120kg
 
Maintenance and warranty
Conditions: temperature and humidity: 23 deg.C+/-5 deg.C, 65%RH+/-20% (no load)
External dimensions do not include protrusions.

Please leave your enquiry here, we will reply as soon as possible.


*only support gif, jpeg, jpg, png, pdf
Switch To Desktop Version