Fine Oven (High Temp. & Large Capacity) (DH1032)
Fine Oven (High Temp. & Large Capacity) (DH1032) DH Series Custom Equipment Industrial Equipment Selangor, Malaysia, Kuala Lumpur (KL), Puchong Supplier, Distributor, Supply, Supplies | Renetech Sdn Bhd
Large fine oven designed to support high throughput.
 
Features of Fine Oven (High Temp. & Large Capacity) (DH1032)
  • Allows precision maintenance of large parts at a constant temperature
  • Quick exhaust and cooling in the unit with the exhaust damper
  • Interactive key entry on the control panel with a green LED digital display for easy settings
  • Features power consumption/ CO2 emissions monitoring
  • Increased safety and self-diagnostic functions
Specifications
Item Code 211763
Model DH1032
Internal dimensions£¨W×D×H mm£© 1000×1000×1000mm
External dimensions£¨W×D×H mm£© 1700×1215×1530mm
Remarks(dimensions) 1000L
Power Source AC220V 28A
Three-phase
Weight 450kg
System Forced air circulation and ventilation
Operating temp. range Room temp. +15°C~300°C
Temperature fluctuation ±1.5°C (at 300°C)
Temperature slope 18°C (at 300°C)
Temperature controller PID Z control
PID Z control Temp setting method Digital setting with ¡ø/¨‹ keys
Timer 1 min~99 hrs 59 min (Resolution: 1 minute or 1 hour)
Operation function Fixed temperature operation, Program operation (Maximum 99 steps, up to 99 patterns, repeat operation function) Duration/time select timer operation function (Fixed temperature operation, auto start/auto stop/quick auto stop, program operation auto start)
Additional functions Accumulated Power on and Operation Time (up to 65,535 hours); Calendar Time (24 hours); Calibration Offset; Monitor Display of Accumulated Power Consumption, Total CO2 Emission, and Heater operating Output; Power Recovery Mode; User Settings Save and Restore Function; Fan Speed Setting Function
Sensor K-thermocouple (double sensor)
Heater Stainless steel pipe heater with a fan , 9.0kW
Fan motor Stainless steel axial flow fan (capacitor motor: 20W), Two motors used for Model 1032
Cable port I.D. ø30mm (rear)
Heat insulator Glass wool + ceramic fiber
Other additional structure Exhaust damper (manual operation)
Safety device Self-diagnostic functions (temp. sensor error, heater disconnection, SSR short-circuit, automatic overheat prevention), Door switch, Fan Failure Detection, key lock, independent overheat protection, electric leakage breaker with over current protection
Shelf / support 3 pcs. / 6 pcs.
 
Maintenance and warranty
  1. Conditions: temperature and humidity: 23 deg.C+/-5 deg.C, 65%RH+/-20% (no load)
  2. External dimensions do not include protrusions.

Please leave your enquiry here, we will reply as soon as possible.


*only support gif, jpeg, jpg, png, pdf
Switch To Desktop Version