Vacuum Drying Oven (DP610P)
Vacuum Drying Oven (DP610P) DP Series (Automatic) Vacuum Drying Oven Constant Temperature & Drying Oven Selangor, Malaysia, Kuala Lumpur (KL), Puchong Supplier, Distributor, Supply, Supplies | Renetech Sdn Bhd Control Panel
Vacuum pump linkage automatic sequence type which release the manual operation of a vacuum pump and a leak valve.
 
Features of Vacuum Drying Oven (DP610P)
  • Automatic sequence vacuum drying oven
  • Don't have to worry about the incorrect operation, reverse flow of vacuum pump oil when power off.
  • Automatic sequence operation of vacuum pump linkage is possible.
  • Saving space, high quality controller, individual overheating prevention and many others function.
  • Prevent the reverse flow of vacuum pump oil when power off.
  • There is no exhaust loss because of 1 inch solenoid vacuum valve.
  • Automatic/manual switch is set up.
Specifications
Item Code 212160
Model DP610P
Method Vacuum drying by decompressed chamber direct heating
Operating pressure range 101 to 0.1 kPa (760 to 1 Torr) at absolute pressure
Max. temp. reaching time Approx. 100 min.
Interior/Exterior material Stainless steel/Cold rolled steel plate with baked-on melamine resin finish
Heater Mica heater, 3.15 kW
Observation window Tempered glass and polycarbonate resin plate
Vacuum gauge Bourdon tube type, 0 to 0.1 MPa (Gauge pressure)
Temp. control method PID control by microprocessor
Additional functions Calendar timer (max. 24 Hrs.), Integration time (max 65535 Hrs.), Time display, calibration offset, power discharge, CO2 discharge, heater consumption display, power failure stagnation mode, user configuration information
Heater circuit control Triac zero-cross control
Operating temperature range 40¡«200¡æ
Temp. adjustment accuracy ± 1.5°C (at 200°C)
Operation functions Fixed temperature operation, auto-start operation, auto-stop operation, program operation ( 99 steps, 99 patterns repeat operation)
Temp. sensor K-thermocouple (double sensor)
Safety countermeasures Self diagnosis functions(Sensor, Heater, Triac, automatic overheating prevention), Independent overheating prevention, Key lock function, Electric leakage breaker
Shelf support step number/pitch 4 steps/140mm
Exhaust port / Purge port NW25 flange / Rc 1/4
Accessories Shelf plate Punched stainless steel, 2 pcs
Internal dimensions£¨W×D×H mm£© 600×600×600mm
External dimensions£¨W×D×H mm£© 820×819×1650mm
Remarks(dimensions) 216L
Power Source AC220V 16A
Single-phase
Weight 310kg
 
Maintenance and warranty
Conditions: temperature and humidity: 23 deg.C+/-5 deg.C, 65%RH+/-20% (no load)
External dimensions do not include protrusions.
 

Please leave your enquiry here, we will reply as soon as possible.


*only support gif, jpeg, jpg, png, pdf
Switch To Desktop Version