Vacuum Drying Oven (Compact) (DP300)
Wide variation of compact and large scale ovens.
Features of Vacuum Drying Oven (Compact) (DP300)
With a high-accuracy controller system, the DP series is able to attain high tempe-rature with accuracy, also with advanced functionality and safety. The series not only performs curing, annealing, baking, de-foaming, hardening & de-aeration treat-ment, but also has vacuum storage ability and upgraded optional items.
Shorter drying time & faster heat-up process
The new Z controller system has been added in thecurrent PID controller system, which has made the heat-up process faster by 37% (comparing with the previous model) and improved temperature stability when operating in low temperatures.
Easy use & Multi-functional
- User-Friendly control panel and display.
- Equipped with power consumption / CO2 emission monitor.
- Various operation mode programmable, auto-start/ auto-stop, timer, calibration offset function, and some more various support functions are equipped as standard.
- Input/output function (optional) 4-20mA analog output, external communication terminal (RS485), alarm output, operation signal, time-up signal, output port.
- Self diagnosis functions (temperature sensor abnormal, heater wire broken).
- Independent overheating prevention & electric leakage breaker.
|Method||Vacuum drying by decompressed chamber direct heating|
|Max. temp. reaching time||Approx. 120 min.|
|Interior material||Stainless steel|
|Exterior material||Cold rolled steel plate with baked-on melamine resin finish|
|Door||Single swing door|
|Heat insulating material||Rock wool|
|Heater||Mica heater, 1.05 kW|
|Vacuum gauge||Bourdon tube type, 0 to 0.1 MPa (Gauge pressure)|
|Observation window||Tempered glass and polycarbonate resin plate|
|Temp. control method||PID control by microprocessor|
|Temp. setting method||Digital setting with UP/DOWN key|
|Timer||0 min. to 99 Hrs. 59 min. and 100 Hrs. to 999 Hrs.|
|Min. division||1 min. or 1 Hrs.|
|Operation function||Fixed temperature operation, Auto-start operation, Auto-stop operation|
|Additional functions||Calendar timer (max. 24 Hrs.), Integration time (max 65535 Hrs.), Time display|
|Heater circuit control||Triac zero-cross control|
|Temp. sensor||K-thermocouple (Double sensor)|
|Exhaust port / Purge port||18mm O.D. (the right side) 1 pc. each|
|Operating temperature range||40 to 240°C|
|Operatingpressure range||101 to 0.1 kPa (760~1 Torr) at absolute pressure|
|Temp. Fluctuation||± 1.0°C (at 240°C)|
|Pump connection port / Purge port||O.D 18(mm) / Rc 1/4|
|Temp display method||Digital display by green LED|
|Safety countermeasures||Self diagnosis functions (Sensor, Heater, Triac, Automatic overheating prevention), Independent overheating prevention, Key lock function, Electric leakage breaker|
|Independent cut-out circuit||Set temperature range: 0 to 270°C|
|Shelf support step number||4 steps|
|Shelf support pitch||71mm|
|Accessories Shelf plate||Punched stainless steel, 2 pcs|
|Internal dimensions£®W×D×H mm£©||300×300×300mm|
|External dimensions£®W×D×H mm£©||510×460×782mm|
Single-phase with step-down transformer
Maintenance and warranty
Conditions: temperature and humidity: 23 deg.C+/-5 deg.C, 65%RH+/-20% (no load)
External dimensions do not include protrusions.