Forced Convection Oven (High Temp.) (DN411H)
Forced Convection Oven (High Temp.) (DN411H) DN-H Series Forced Convection Oven Constant Temperature & Drying Oven Selangor, Malaysia, Kuala Lumpur (KL), Puchong Supplier, Distributor, Supply, Supplies | Renetech Sdn Bhd Temp. Rising Curve (50Hz Room temp. 23¡æ) Overheat Prevention Device Method Interior Dimensions
Industrial & Laboratory Forced Convection
 
Features of Forced Convection Oven (High Temp.) (DN411H)
  • High precision constant oven
  • Due to high precision control system, high performance temperature control is realized, and the CO2 discharge, power discharge can be also displayed at the monitor.
  • Suitable for Heat Insulation Test and Curing Process up to 360deg.C.
  • Simple Operation by Interactive Key Input.
  • Calibration offset function, power failure recovery mode , the user configuration information and various function are standard added.
  • Incorporates with maximum 99 steps, 99 patterns program controller with repeat function.
  • Loaded with Total Operation Hours Timer.
  • Data acquisition from internal test device is easy because of cable holes.

Specifications
Item Code 212901
Model DN411H
Convection Type Forced Convection
Operating Temp. Range Room Temp.£«15¡«360¡æ
Temp. Adjustment Accuracy ±0.2¡æ£¨at 360¡æ£©
Temp. fluctuation ±0.6¡æ£¨at 360¡æ£©
Temp. Distribution Accuracy ±3¡æ£¨at 360¡æ£©
Temp. Gradient 12¡æ£¨at 360¡æ£©
Time to Reach to Max. Temp. Approx. 60min.
Interior / Heat Insulation Material Stainless Steel / Glass Wool + Ceramic Fiber
Fan Sirocco Fan, Condenser Type Motor 30W
Cable holes 33mm diameter (right side)
Temp. Control Type PID Control by Micro Computer
Temp. Setting Type Digital Setting by UP/DOWN Key
Temp. Display Digital Indication by Green LED
Other Display Temp. Pattern Display for Operating Display by LED
Timer / Timer Resolution 1min. to 99hrs. 59min. or 100hrs. to 999hrs. / 1min. or 1hrs.
Operating Function Fixed Temp. Operation, Automatic Start, Automatic Stop, Quick automatic stop, Program Operation
Additional Function Calendar time(24 hours), Calibration Off Set Function, electricity consumption, CO2 discharge, Heater output operation display monitor, power failure return mode, user configuration information saving/summoning.
Heater Circuit Control / Sensor Triac Zero-cross Type / K-Thermocouple( for temp. adjustment, individual overheating prevention)
Safety Countermeasure Self Diagnosis Function (Sensor, Heater, Fan, Triac, Main Relay, Automatic Overheat Prevention), Key Lock Function, Independent Overheating Prevention, Door Switch, Electric Leakage Breaker
Shelf Max. Load Approx. 30kg / shelf
Shelf support step number / Pitch 12pcs. / 30mm
Shelf material Stainless wire
Accessories¡¡Shelf / Shelf support 2pcs/ 4pcs
Heater SUS Pipe Heater 3.0kW
Exhaust port 33mm diameter x 2 ( back side)
Internal dimensions£¨W×D×H mm£© 470×450×450mm
External dimensions£¨W×D×H mm£© 640×695×915mm
Remarks(dimensions) 95L
Power Source AC220V 15A
Single-phase
Weight 90kg

Maintenance and warranty
Conditions: temperature and humidity: 23 deg.C+/-5 deg.C, 65%RH+/-20% (no load)
External dimensions do not include protrusions.

Please leave your enquiry here, we will reply as soon as possible.


*only support gif, jpeg, jpg, png, pdf
Switch To Desktop Version