Forced Convection Oven (Energy Saving) (DNE601)
High-performance, energy-saving, programmble constant temperature, forced convection ovens.
Features of Forced Convection Oven (Energy Saving) (DNE601)
- Due to high precision control system, high performance temperature control is realized, and the CO2 discharge, power discharge also displayed at the monitor.
-
The DNE series represents forced convection constant temperature oven. They achieve an energy-saving rate of 30 to 40% compared to previous models.
Available Various Functions
- Incorporates with maximum 99 steps, 99 patterns program controller with repeat function.
- Loaded with total operation hours timer.
- Data acquisition from internal test device is easy because of cable holes.
Specifications
| Item Code | 212824 |
|---|---|
| Model | DNE601 |
| Temp. adjustment accuracy | ±0.5°C (at 210°C) |
| Temp. distribution accuracy | ±2.0°C (at 210°C) |
| Max. temp. reaching time | Approx. 70 min. |
| Interior/Exterior material | Stainless steel /Electro-galvanized steel sheet with epoxy and melamine resin baking finish |
| Operation function | Fixed temperature operation, Program operation, Auto start, Auto-stop, Quick automatic stop |
| Program mode | Program operation; Maximum 32 steps, Repeat function |
| Additional functions | Timer Function (Actual Timer within 24hrs.), Total operation hours timer (to 65535hrs.), Calendar time ( 24 hours), |
| Shelf plate with standard load | Approx. 15kg/piece |
| Heat insulating material | Glass wool |
| Heater | Stainless pipe heater |
| Heater | 1.2kW |
| Fan Type | Scirocco fan |
| Motor | Condenser type,10W |
| Cable hole/Air in-take hole | 33mm I.D. (the right side) 1pc. |
| Temp. controller | PlD Z control by microprocessor |
| Temp. setting method | Digital setting by UP/DOWN key |
| Temp display method | Digital Display by Green LED |
| Timer/Min.division | 0 min. to 99 Hrs. 59 min. /1 min. |
| Additional functions | Calibration offset, Power discharge, CO2 discharge, Power failure return mode, User configuration information |
| Heater circuit control | Triac zero-cross control |
| Safety countermeasures | Self diagnosis functions (Temp. sensor abnormal, Heater disconnection, SSR- short, Main relay abnormal, Automatic overheating prevention), |
| Safety countermeasures | Key lock function, Independent overheat prevention, Electric leakage breaker with over current protection |
| Shelf support step number | 13 steps |
| Shelf support pitch | 30 mm |
| Accessories Shelf plate | Stainless steel, 2 pcs. |
| Accessories Shelf support | 4 pcs. (1 pair - 2 pcs. is fixed) |
| Method | Forced air circulation |
| Operating temperature range | Room temp. +20 to 210°C |
| Internal dimensions（W×D×H mm） | 600×500×500mm |
| External dimensions（W×D×H mm） | 730×695×910mm |
| Remarks(dimensions) | 150L |
| Power Source |
AC115V 12A Single-phase |
| Weight | 77kg |
Maintenance and warranty
Conditions: temperature and humidity: 23 deg.C+/-5 deg.C, 65%RH+/-20% (no load)
External dimensions do not include protrusions.
