Glassware Drying Oven (DG400)
Easy-operational and highly acclaimed Glassware drying oven.
Features of Glassware Drying Oven (DG400)
- Use a big observation window for easy observation.
- Many labwares can be dried at one time which can be safe kept or used after drying.
- The interior and exterior use twofold structure of high-insulative effect.
- The chamber heater is stainless steel heating pipe with a water pan at the bottom, use at ease even for dripping labwares.
- The interior is made of stainless steel, easy to keep clean.
- On the basis of DG410C and DG810C, DG450C and
-
DG850C add multiple functions. Install a suction filter at air suction port, and set forced exhaust fan at the side of exhaust port. Moreover, it's equipped with standard sterilamp, fast and clean drying.
Safety
Self-diagnosis circuit (abnormal temp. input), power outage compensation, deviation correction, overcurrent ELB, independent overheat protector, etc.
Specifications
Specifications
Item Code | 211992 |
---|---|
Model | DG400 |
Method | Natural convection |
Operating temp. range | RT£«5 to 70¡æ |
Interior material | Stainless steel |
Exterior | Cold rolled steel plate with chemical proofing coating |
Heater | Stainless steel pipe heater |
Heater | 1.0kW |
Observation window (W×Hmm) | 250×300 |
Exhaust port | I.D. 34mm×2 |
Suction port | I.D. 30mm×2 |
Germicidal lamp | — |
Temp. control | PID control |
Temp. setting | Use specialized function menu key and UP/DOWN key to set |
Temp. display | Measured temp. display: Green 4-digit LED digital display |
Temp. display | Setting temp. display: Red 4-digit LED digital display |
Timer | 1min-99 hr 59 min and 100 hr-999 hr 50 min (Attached with timing wait function) |
Operation function | Fixed temp., Quick auto stop, Auto start, Auto stop operation |
Additional function | Deviation correction, Key lock, Power outage compensation |
Heater circuit control | SSR driving |
Sensor | Temp. controller: K thermocouple , Overheat protection: Liquid-expansion temp. controller |
Safety device | Self-diagnosis (Abnormal temp. sensing, Auto overheat prevention, SSR short circuit), Key lock, Independent overheat protector, Overcurrent ELB |
Shelf plate with standard load | 15kg / piece |
Shelf support step number/pitch | 10 steps / 30mm |
Shelf plate | Stainless punching metal |
Shelf rest | 2 pcs |
Shelf bracket | 4 pcs |
Water pan | 1 pc |
Optional Stand | ON61C |
Optional Others | Shelf plate (1 plate with 2 rests) |
Internal dimensions£¨W×D×H mm£© | 450×450×450mm |
External dimensions£¨W×D×H mm£© | 504×562×788mm |
Remarks(dimensions) | 92L |
Power Source |
AC220V 5A Single-phase |
Weight | 45kg |
Maintenance and warranty
Conditions: temperature and humidity: 23 deg.C+/-5 deg.C, 65%RH+/-20% (no load)
External dimensions do not include protrusions.